Valley Line LRT | TransEd/Marigold | City of Edmonton

Looks like they’re close to train testing at Bonnie Doon.
2B7463D5-1245-4A16-810E-571383AA8FCD.jpeg
37A7C483-524C-4436-AD1C-E462555B3864.jpeg
 
Last edited:
Churchill Connector - interior:

20220505_173334.jpg

20220505_173347.jpg

20220505_173405.jpg



Outside of the Winspear:

20220505_173622.jpg

20220505_173639.jpg



Quarters LRT stop:

20220505_174020.jpg


The ETS sign is blinking - gave up on snapping a proof pic after about 10 tries:

20220505_174339.jpg


Convenience store and liquor store are still there:

20220505_174550.jpg



LRT line going underground:

20220505_174713.jpg

20220505_174856.jpg
 
Last edited:
When I drove on 66 Street, I saw two trains between Mill Woods and MB/Woodvale Stations. I also saw the traffic lights flashing at 34 Ave/66 Street. I’m not sure if TransEd was looking at synchronizing the LRT signals with the lights.
 
I went to the Bonnie Doon stop to see the train (it's weird, the amount of video-stalking expeditions i've been to see these trains, I've never been on one before) and here's some pics and random facts.
I managed to sit in on a question-period between one of the engineers and a member of the public (who seemed very fixated on battery-powered trains, idk why, he was convinced there were batteries on the Flexities. there aren't) and the engineer mentioned that the trains have two powered bogies and the rest are un-powered. the testing has been done under various weight-loadings, including full passenger loads. he was saying that they've already completed that fully-loaded testing on Connor's Road (the steepest point on the line) and trains were able to climb it at full speed. the trains have no issues in fair weather, and for winter they have automatic sanders. the train senses wheelslip and applies sand, without driver intervention. the trains will apply sand whenever wheelslip occurs on the hill.
I also asked about power supply. the new line runs at 750V DC, instead of the 600V DC the existing lines (and ERRS fleet, and our former trolleybus system) uses. he was ab it confused as to why our current system ran at 600V DC. he was British, and it seemed like he found it odd. He said the 750V is an industry standard worldwide, so the Valley Line using it was simply to match that standard.
now for PHOTOS:
the trians fit so nice and cosy in the stations. they're open-air, but there's not a big gap in the roof. and speaking of gaps, the step-free setup is pretty good too.
unnamed-7.jpgunnamed-1.jpg
the interiors are really nice, a bit narrow-feeling compared to the U2s, but bright and airy, like a bendy bus with better colour choices. they are very long. the first pic was taken from the middle of the train. I couldn't get full shots without getting a bunch of strangers in the shot lol. the There is a hump for the intermediate bogies, but it's low and gradual, again like in the newest bendy-buses.
unnamed-4.jpgunnamed-10.jpg
They aren't joking about a view through the front. The entire front wall is glass from about 42", up to the roof. the views are as clear as can be.
unnamed-3.jpgunnamed-2.jpg
views for passengers are spectacular too. the windows are huge, starting low in the wall and going all the way to the ceiling.
unnamed-8.jpgunnamed-5.jpg
lastly, a closeup of the info screens, for anyone audio-visually inclined if you're curious about what these look like. they're probably 10" tall, i can't tell if it's one screen or two side-by-side. it was scrolling through station renderings today on one side, and telling everyone the train was a 'charter' on the other.
unnamed-6.jpg
yeah, the new trains are nice! it's a bit of a shift from the existing, high-capacity high-floor line, namely how close everything feels on the platforms (compared to the swathes of quarry tile to spread out on in places like Churchill, the new platforms feel like they'll get squishy fast) and the friendlier, more bus-esque design of the train interiors. it will be interesting to see how this shakes out once it goes into service. I hope Hyundai-Rotem is taking notes.
 
Here are some of my pics from today. I think it feels a lot roomier than the current LRVs, even though these ones are lower capacity. A motorman I spoke with said that he hasn't seen the digital display maps fully operational yet, but they'll display, from top to bottom, upcoming stop(s), next stop, previous stop(s). He could not say whether the art on the right half of the screens is a permanent feature, or if the maps will be full screen at launch. Also, the traffic lights should start to switch while the LRVs are boarding/alighting passengers, so he expects that there will be minimal waiting at the stops for the right lights. Ideally, by the time the LRVs are ready to leave their stop, the lights will already be changed.

He was hired last summer, and said that operators weren't laid off due to the delays. They spent the extra time training and becoming certified, through a mixture of in-class work and hands-on experience, and it's been his full time job since he was hired.
20220515_140902.jpg20220515_141102.jpg20220515_141505.jpg20220515_141611.jpg20220515_141647.jpg20220515_141728.jpg20220515_141740.jpg20220515_142252.jpg20220515_142316.jpg20220515_142430.jpg20220515_142528.jpg20220515_142559.jpg20220515_142741.jpg20220515_142915.jpg
 
The LRT staff told me that the Valley Line will open “sometime this summer”, ranging from June 21 to Sept 21, rather than July 29.
September ain’t summer fam haha. And June 21 is well into summer. The moving target is tough.

Thanks everyone for sharing pics. Trains look really nice. Landscaping as well is really coming in now with the grass growing and trees planted. When I biked north across tawatina on Saturday, all my friends thought Louise McKinney is looking beautiful.
 

Back
Top