Kaizen
Senior Member
A couple potato camera shots from Old Strath...
Stantec Tower | 250.84m | 66s | ICE District Prop.
- Thread starter SRC Admin
- Start date
Member Bio
- Joined
- Sep 22, 2015
- Messages
- 10,218
- Reaction score
- 23,061
- Location
- Edmonton, Alberta, Canada
Hoarding is down, weather protection being installed. Rexall signs are up facing the plaza.
The sidewalk is already way more inviting and more utilized now!
The sidewalk is already way more inviting and more utilized now!
Member Bio
- Joined
- Sep 22, 2015
- Messages
- 10,218
- Reaction score
- 23,061
- Location
- Edmonton, Alberta, Canada
Apparently the Rexall is open now, accessible through the lobby. Will have to check it out.
Member Bio
- Joined
- Sep 22, 2015
- Messages
- 10,218
- Reaction score
- 23,061
- Location
- Edmonton, Alberta, Canada
It's not as big as I was expecting, but it's got the basics. I image they will shift their offerings when the Loblaws opens in a couple of years, too.
More weather protection being installed just outside:
More weather protection being installed just outside:
Last edited:
Member Bio
- Joined
- Sep 22, 2015
- Messages
- 10,218
- Reaction score
- 23,061
- Location
- Edmonton, Alberta, Canada
PERMIT_DATE April 03, 2019
JOB_CATEGORY Commercial Final
ADDRESS 160, 10220 - 103 AVENUE NW
NEIGHBOURHOOD DOWNTOWN
JOB_DESCRIPTION To construct interior and exterior alterations to a Professional, Financial and Office Support Services Use, tenant fit-up for Scotia Bank ice district, replace existing single mandoor with a double mandoor, and to align the proposed horizontal mullion above the double door to align with the existing horizontal mullion.
BUILDING_TYPE Office Buildings (520)
WORK_TYPE (03) Interior Alterations
CONSTRUCTION_VALUE 640,000
ZONING AED, AED
JOB_CATEGORY Commercial Final
ADDRESS 160, 10220 - 103 AVENUE NW
NEIGHBOURHOOD DOWNTOWN
JOB_DESCRIPTION To construct interior and exterior alterations to a Professional, Financial and Office Support Services Use, tenant fit-up for Scotia Bank ice district, replace existing single mandoor with a double mandoor, and to align the proposed horizontal mullion above the double door to align with the existing horizontal mullion.
BUILDING_TYPE Office Buildings (520)
WORK_TYPE (03) Interior Alterations
CONSTRUCTION_VALUE 640,000
ZONING AED, AED
archited
Senior Member
too bad -- should have been retail or hospitality tenant.
Member Bio
- Joined
- Sep 22, 2015
- Messages
- 10,218
- Reaction score
- 23,061
- Location
- Edmonton, Alberta, Canada
Him
Active Member
Yeah... let's just pretend this side of Stantec tower doesn't exist shall we? haha.
Great shot though @Daveography. Keep em coming
Member Bio
- Joined
- Sep 22, 2015
- Messages
- 10,218
- Reaction score
- 23,061
- Location
- Edmonton, Alberta, Canada
And the reverse view:
Airboy
Senior Member
The Patio on 30 , those walls look to low. It was hard enough to go there during construction. I look at those photos and know I will not be going to that level if I had the chance.
Kaizen
Senior Member
Member Bio
- Joined
- Sep 22, 2015
- Messages
- 10,218
- Reaction score
- 23,061
- Location
- Edmonton, Alberta, Canada
I don't have issues with heights personally, but looking at the balcony wall heights compared to the workers and they seem pretty reasonable to me.
Member Bio
- Joined
- Sep 22, 2015
- Messages
- 10,218
- Reaction score
- 23,061
- Location
- Edmonton, Alberta, Canada
Article coming today, but here's some photos of the six show suites. Open house coming April 13, 14, 27, and 28; register at experiencesky.ca.
731 square-foot plan "D":
920 square-foot plan "A":
628 square-foot plan "B":
628 square-foot plan "C":
1,221 square-foot plan "H":
731 square-foot plan "D":
920 square-foot plan "A":
628 square-foot plan "B":
628 square-foot plan "C":
1,221 square-foot plan "H":
Airboy
Senior Member
those ceiling heights don't look as low in the photos as they did while I was no site.
Some were definitely better than others. There were a few small ones that were super efficient with space and others where a lot of space is wasted.